background image

c. MAC OS X: 32bit 384kHz DSD Interface 

i.

For Mac OS X you can locate the Audio Midi setup by following these instructions: 
Go to Finder----> Applications----> Utilities----> Audio Midi setup. Once you have 
reached the Midi setup you will need to select the W4S DAC-2 as the default 
output device and apply the setting.  

ii.

For Windows OS you will need to locate the Audio output device (Manage Audio 
Devices) selection which can be found in the control panel located in the startup 
menu. Regardless of your system you will need to set the default output device to 
the Wyred 4 Sound interface. This setting will be part of the OS and not the media 
player.  

**Please note: Additional output configuration and device selection may be required in your media 
player.** 

9. The last step is easy

 Enjoy your music! 

 

Bandwidth / IIR settings 

 

There are several settings in the setup menu that most will not opt to change, but are there just 

in-case. W4S has set the default settings for optimal sonics. Certain systems may benefit from changing 
these settings, and is really a personal preference more than anything.  PCM Bandwidth selects the 
range of which the dac will filter the signal.  Allowing higher bandwidths may introduce more 
information and noise than desired.  IIR stands for Infinite Impulse Response.  This is another setting 
that each customer should tune to their liking. Please note that these settings offer the slightest sonic 
differences and may not be really noticed or appreciated until the unit is fully “broken-in”. 

 

Max Volume Settings 

 

One feature that can be found in the setup menu is the Max volume settings that can be set 

differently for each input.  The Default level is set to -0 db which will offer the highest level output. 
Some may choose to lower the output level of the DAC to prevent overdriving components connected 
to its outputs.  We recommend that you research the maximum recommended preamp or amps input 
voltage to maintain proper levels. 

 

 

 

 

WYRED 4 SOUND 

DAC-1 LE v1

 

4235 Traffic Way 

Atascadero, CA 93422 

PH: 805­466­9973 

FAX: 805­462­8962 

[email protected]   

www.wyred4sound.com 

©2014 WYRED 4 SOUND 

 

All rights reserved.                                                         

Page 8 of 16 

Содержание DAC-1 LE

















Отзывы: