reproduction is the product of our discrete dual-differential FET input amplifier stage which uses all
Dale RN55d resistors for precise control. Because of the dual differential circuits, the completely
balanced signal offers balanced and unbalanced outputs which both take advantage of common-mode
rejection.
To complete the package, we decided to connect a 2 line display for easy verification of input
selection, and sample rate. You will notice that when the DAC is locked onto a signal, the sample rate
will be shown, when the signal is lost, the sample rate will read as ----. The up and down buttons on
either side of the power button will allow for input scrolling. From the front panel, you can toggle the
mute function by quickly pressing the power button. If you push and hold the power, the DAC will
power down. When the unit is off, you can quickly tap the power button to bring the unit back to life.
Setup Menu
With a quick look at the setup options, you will quickly see how flexible the DAC-1 LE really is.
With each input offering different output levels, you can choose the independent control of each
source to best suit the needs of your system. As you will find, other setup options include display
dimming options, automatic input scrolling, IIR Bandwidth, PCM Roll-off slope (fast/slow), and a
default reset in case things get jumbled up.
To enter the Setup Menu, push and hold the (UP) and (DOWN) buttons while pressing the
(POWER) button when the unit is off. Once the menu is activated, you can use the up and down
buttons to scroll through the different setup registers. Once the register is selected that you wish to
adjust, press the power button quickly (do not press and hold or the unit may power off) to select and
enter that register. The menu will now be adjustable (EDIT MODE) and you can use the up/down
buttons again to edit the settings. Once the desired setting has been selected and is displayed, press
the power button again to save and return to the main menu. You can now scroll through more
settings and use the same method to make the changes needed. To exit and apply all changes, press
and hold the power button in any main menu register (NOT IN EDIT MODE). The unit will then power
down and will be ready for use. (Setup menu next page)
WYRED 4 SOUND
DAC-1 LE v1
4235 Traffic Way
Atascadero, CA 93422
PH: 8054669973
FAX: 8054628962
©2014 WYRED 4 SOUND
All rights reserved.
Page 5 of 16
