12
Unfold the inner wings of the right boom by engaging
the right boom fold switch. Repeat with the left boom
switch.
Activate the right outer fold switch to fold the right outer
wing out. Repeat with the left outer wing.
Boom Operation
Unfold and fold the boom several times to purge any air
from the hydraulic lines. After the initial fold/unfold cycle,
the “combined” control can be used to fold/unfold both
wings simultaneously.
Tilting the Boom
The boom can be tilted by activating the tilt switch on either
wing. Push the switch up to raise the wing; push the switch
down to lower the wing. The combined tilt switch will tilt
both wings simultaneously.
Push the tilt switch up for each boom to raise the boom
out of the boom rests. The individual boom switches on
the control panel operate in the desired direction of travel
i.e., push the fold switch toward the outside of the panel
to fold the boom out, or push the tilt switch up to raise the
boom section.
Figure B6
Unfolding Right Boom
Figure B5
Activating Tilt Switch Raises Wing
Figure B7
Unfolding Right Breakaway Section
Figure B8
Unfolding Both Wings With “Combined” Switch
Figure B9
Activating Tilt Switch Raises Wing
Содержание Spray Wyng II
Страница 4: ... ...
