WASTE WATER PUMPING SYSTEMS
Wykamol SumpFlo
™
3/44
Installation and operating guidelines
Technical advice: 0845 400 6666
www.wykamol.com
2. Product summary
The Wykamol SumpFlo is a range of fully automatic waste water pump station, suitable for pumping ground water from a
cavity membrane system and/or surface water from lightwells to a higher level.
2.1 SumpFlo
The system comprises of a polyethylene chamber, stainless steel float bracket, 1¼” PVC internal pipework and a powerful
240V submersible pump. The system is very versatile, enabling the installer to locate inlets to their specifications.
An Access Cover can be purchased to installer specifications.
It is recommended that a High Level Alarm product is installed, which acts as a warning system to alert the end user if
the water rises above the normal operating level within the chamber. High Level Alarm kits can be purchased to installer
specifications.
2.2 SumpFloTwin
The system comprises of a polyethylene chamber, stainless steel float bracket, 1¼” PVC internal pipework and two
powerful 240V submersible pump. The system is very versatile, enabling the installer to locate inlets to their specifications.
An Access Cover can be purchased to installer specifications.
It is recommended that a High Level Alarm product is installed, which acts as a warning system to alert the end user if
the water rises above the normal operating level within the chamber. High Level Alarm kits can be purchased to installer
specifications.
1¼” PVC pipework configuration is available in single and twin discharge options, upon request.
2.3 SumpFlo BBPS (battery backup system)
The system comprises of a polyethylene chamber, stainless steel float bracket, 1¼” PVC internal pipework, a powerful
240V submersible pump, 24V Battery Backup pump and Battery Backup Control Panel complete with integrated High
Level Alarm. The system is very versatile, enabling the installer to locate inlets to their specifications.
The system comes complete with a battery backup pump system, which is designed especially for where the possibility
of primary 240V pump failure through either a pump fault or loss of mains power would be catastrophic. The system acts
as a backup that will alert the end user if the water rises above the normal operating level within the chamber and will
activate the 24V backup pump. The system is designed to activate via three separate float switches. The panel contains
two batteries that are trickle charged, that will keep the backup system operational in situations of mains power failure
(please refer to section 4.3 ‘Battery Backup Pump System’ for details of battery life).
An Access Cover can be purchased to installer specifications.
1¼” PVC pipework configuration is available in single and twin discharge options, upon request.
