11
Cables
The Forerunner cable connects each of the two power supply outputs to a daisy chain
of up to eight Forerunner Color Changers and provides the color changers with power
and control signal. The Forerunner cable uses 4-pin XLR connectors on either end and
consists of two -14 AWG conductors and a 22 AWG twisted, shielded pair.
Note: The cable used in the Forerunner System is the same cable which is used in the
RAM/Coloram II System and may be referred to as either RAM/Coloram II cable or
Forerunner cable.
Installing the Forerunner
To get your Forerunner System up and running, follow these hookup and checkout
procedures.
1.
Set the DMX512 color changer channels
Each color changer is assigned an individual DMX address to which it will respond from
the lighting console. The addresses are set via the three rotary switches located on the
back of each color changer. Valid DMX addresses are 001 - 512.
Содержание FORERUNNER 4540
Страница 1: ...User Manual ...
Страница 3: ...3 ...