MDC901-EVBHB Rev2021Jan5
MinDCet NV
Attention: Please refer to Evaluation Kit Important Notice on page 20
Page 20
Important Notice
The Technical Manual is based on our knowledge and experience of typical requirements concerning these
areas. It serves as general guidance and should not be construed as a commitment for the suitability for
customer applications by MinDCet NV (hereafter referred to as MDC). The information in the Application
Note is subject to change without notice. This document and parts thereof must not be reproduced or copied
without written permission, and contents thereof must not be imparted to a third party nor be used for any
unauthorized purpose. MinDCet NV and are not liable for application assistance of any kind. Customers may
use MDC’s assistance and product recommendations for their applications and design. The responsibility for
the applicability and use of MDC Products in a particular customer design is always solely within the authority
of the customer. Due to this fact it is up to the customer to evaluate and investigate, where appropriate, and
decide whether the device with the specific product characteristics described in the product specification is
valid and suitable for the respective customer application or not. The technical specifications are stated in
the current datasheet of the products. Therefore the customers shall use the datasheets and are cautioned
to verify that datasheets are current. The current data sheets can be downloaded at www.mindcet.com.
Customers shall strictly observe any product-specific notes, cautions and warnings. MDC reserves the right
to make corrections, modifications, enhancements, improvements, and other changes to its products and
services. MDC DOES NOT WARRANT OR REPRESENT THAT ANY LICENSE, EITHER EXPRESS OR IMPLIED, IS
GRANTED UNDER ANY PATENT RIGHT, COPYRIGHT, MASK WORK RIGHT, OR OTHER INTELLECTUAL PROPERTY
RIGHT RELATING TO ANY COMBINATION, MACHINE, OR PROCESS IN WHICH MDC PRODUCTS OR SERVICES
ARE USED. INFORMATION PUBLISHED BY WE REGARDING THIRD-PARTY PRODUCTS OR SERVICES DOES NOT
CONSTITUTE A LICENSE FROM MDC TO USE SUCH PRODUCTS OR SERVICES OR A WARRANTY OR
ENDORSEMENT THEREOF. MDC products are not authorized for use in safety-critical applications, or where
a failure of the product is reasonably expected to cause severe personal injury or death. Moreover, MDC
products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear
control, submarine, transportation (automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network etc. Customers shall inform MDC about the intent
of such usage before design-in stage. In certain customer applications requiring a very high level of safety
and in which the malfunction or failure of an electronic component could endanger human life or health,
customers must ensure that they have all necessary expertise in the safety and regulatory ramifications of
their applications. Customers acknowledge and agree that they are solely responsible for all legal, regulatory
and safety-related requirements concerning their products and any use of MDC products in such safety-
critical applications, notwithstanding any applications-related information or support that may be provided
by MDC. CUSTOMERS SHALL INDEMNIFY MDC AGAINST ANY DAMAGES ARISING OUT OF THE USE OF MDC
PRODUCTS IN SUCH SAFETY-CRITICAL APPLICATIONS.
The following conditions apply to all goods within the product range of MinDCet NV:
1. General Customer Responsibility
Some goods within the product range of MinDCet NV contain statements regarding general suitability for certain
application areas. These statements about suitability are based on our knowledge and experience of typical
requirements concerning the areas, serve as general guidance and cannot be estimated as binding statements about
the suitability for a customer application. The responsibility for the applicability and use in a particular customer design
is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where
appropriate to investigate and decide whether the device with the specific product characteristics described in the
product specification is valid and suitable for the respective customer application or not. Accordingly, the customer is
cautioned to verify that the datasheet is current before placing orders.
2. Customer Responsibility related to Specific, in particular Safety-Relevant Applications
It has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end
of the usual lifetime cannot be completely eliminated in the current state of the art, even if the products are operated
within the range of the specifications. In certain customer applications requiring a very high level of safety and especially
in customer applications in which the malfunction or failure of an electronic component could endanger human life or
