Würth WDM5-12
5
EN
Operations
Multifunctional endpiece
i
The orientation of the endpiece is
automatically detected and the
zero point is accordingly adjust-
ed.
IMPORTANT:
After each change of the end-
piece position the compass has
to be calibrated.
Distance unit setting
Tilt unit setting
Switch between the
following units:
0.000 m
0.0000 m
0.00 m
0.00 ft
0‘00‘‘ 1/32
0.00 in
0 in 1/32
2 sec
Switch between the
following units:
0.0 °
0.0 %
2 sec
simultaneously
Timer (automatic release)
s
1
Adjust delay of auto-
matic release (max.
60 sec, standard set-
ting 5 sec)
2
i
Once the key is released with the laser
activated, the remaining seconds until
the measurement are displayed in a
countdown. The delayed release is
recommended for precise aiming e.g.
at long distances. It avoids shaking of
the device when pressing the measure-
ment key.
