Würth RL 2-14, Руководство пользователя

Страница: 82 / 100

Würth RL 2-14
30
Batteries
en
)
The battery pack reaches a full charge in approximately 5 hours if completely empty. A one hour charge
should allow the RL 2-14 to run for a full eight hours.
2. Plug the AC connector into the appropriate AC power source.
3. Connect the charger plug into the charge jack on the RL 2-14 battery pack.
4. The small LED next to the charge jack flashes indicating that the RL 2-14 is charging. The LED is on
solid when the battery pack is fully charged.
5. When the battery pack is fully charged, disconnect the charger plug from the charge jack.
6. Slide the locking mechanism to the centre position to prevent dirt from getting into the charging jack.
Step Description