Würth ORSY mat FP, Руководство по эксплуатации

Страница: 23 / 36

23
3 SCOPE OF SUPPLY
Master module
Item Description Quantity
1 Master module incl . control 1
2 Barcode scanner incl . USB cable 1
3 Key for body doors 2
4 Cap, hole in body (for CAN cable) 2
5 Cover, underside of body 2
6 Mobile radio antenna 1
7 Power supply unit (24 V/DC) 1
8 Body test record 1
9 Lacon test record 1
10 IEC power connector 1
Satellite module
Item Description Quantity
1 Satellite module 1
2 Key for body doors 2
3 Cap, hole in body (for CAN cable) 2
4 Cover, underside of body 1
5 CAN cable (already connected) 1
6 Power supply unit (24 V/DC) 1
7 Body test record 1
8 Lacon test record 1
9 IEC power connector 1
4 INSTALLATION
The installation and subsequent maintenance work must be carried out by trained skilled personnel, who are
familiar with the machine and its safety .
4.1 Unpacking the machine
After removing the packaging, check that the machine is intact . In case of doubt, do not use the machine .
The packaging materials must be disposed of by an authorised specialist company and further used .
4.2 Installing the machine
Do not install the machine outdoors, but in enclosed rooms at a temperature of 5° to 34°C . The relative
humidity must not exceed 65% .
Do not install in areas in which water jets are used for cleaning. The vending machine must also not be
exposed to liquid mists and vapours .
The machine must be installed near a wall with sufficient distance from the wall for ventilation. The machine
must be installed so that it does not tilt by more than 2°; adjust using the adjustable feet if necessary.