4
Safety instructions
The controller has been manufactured and tested with regard to high quality and safety requirements. The unit is subject to the
statutory guarantee period of two years from the date of sale.
The warranty and liability shall not include, however, any injury to persons or material damage that is attributable to one or
more of the following causes:
-
Failure to observe these installation and operating instructions
-
Improper installation, commissioning, maintenance and operation
-
Improperly executed repairs
-
Unauthorised structural changes to the unit
-
Installation of additional components that have not been tested together with the unit
-
Any damage resulting from continued use of the unit despite an obvious defect
-
Failure to use original spare parts and accessories
-
Use of the device for other than its intended purpose
-
Operation above or below the limit values listed in the speci
fi
cations
- Force
majeure
A.5. - Warranty and liability
The System Controller Latento System Controller facilitates ef
fi
cient use and function control of your solar or heating system.
The device is impressive most of all for its functionality and simple, almost self-explanatory operation. For each step in the
input process the individual entry keys are assigned to appropriate functions and explained. The controller menu contains
headwords for the measured values and settings, as well as help texts or clearly-structured graphics.
The Latento System Controller can be used as a system controller for the various system variants illustrated and explained
under „Hydraulic variants / Systems / Diagrams“ on page 12.
Important characteristics of the Latento System Controller:
-
Depiction of graphics and texts on an backlit display
-
Simple viewing of the current measurement values
-
Analysis and monitoring of the system by means of statistical graphics etc.
- Individual
con
fi
guration of special functions
-
Extensive setting menus with explanations
-
Menu block can be activated to prevent unintentional setting changes
-
Resetting to previously selected values or factory settings
-
A wide range of additional functions are available
A.6. - About the controller
- System controller Latento System Controller
- 3 screws 3,5x35mm and 3 plugs 6mm for wall installation
- 12 strain relief clips with 24 screws, replacement fuse 1x T2A / 250V, 1x T630mA / 250V
- Installation and instructions manual Latento System Controller
- Micro SD Card
Optionally contained depending on design/order:
- 2-3 PT1000 temperature sensors and immersion sleeves
-
Ethernet
Additionally available:
- Pt1000 temperature sensor, immersion sleeves, overvoltage protection,
- CAN Bus Data Logger
- RC21 Room thermostat with remote adjuster
A.7. - Scope of supply
A.8. - Disposal and pollutants
The unit conforms to the European RoHS directive 2002/95/EC for the restriction of the use of certain hazardous substances
in electrical and electronic equipment.
Caution
The unit must not under any circumstances be disposed of with ordinary household refuse. Dispose of the unit only
at appropriate collection points or ship it back to the seller or manufacturer.
