Würth 0981 180 851, Перевод оригинальной инструкции по эксплуатации

Страница: 8 / 93

8
Control elements
(See Fig. I)
1 Carrying handle
2 Front cover panel
3 Pin support
Matching of the lamp to the lighting
situation
You can adapt the WGL 2 to match your individual
lighting situation. The front cover panels are availa-
ble for this purpose.
a) With front cover panel
• To illuminate a close-up area.
b) Without front cover panel
• For better illumination at a distance.
Operation
Installation when operating with tripod/
mast system (Fig. II)
■
Connect the lamp with the pin support to the
tripod/mast.
■
Lock the lamp using the star knob.
Operation
(See Fig. III)
1 Potentiometer
2 ON/OFF Push switches
The WGL 2 lamp can be controlled via the two
push switches [2] and the rotary control on the
control unit.
The control unit is integrated in the power supply
cable.
4 of the 8 Xpect 2 LED modules are switched on/off
per push switch.
Clockwise rotation of the potentiometer [1] increa-
ses the illuminance (illumination level), while antic-
lockwise rotation reduces it.
Technical data
Non-stationary workplace lamp Art. 0981 180 851
Lamp luminous flux 80,000 lm
Bulb luminous flux 90,000 lm
Operating voltage 100 - 240 V, 50/60 Hz
Capacity rating 560 W
Degree of protection IP65
Protection class I
Impact resistance IK10
Housing Impact and break-proof
Cable Oilflex
®
540 P yellow
Cable length
8 m (5 m 3G1.5 mm
2
, 3 m 7G0.75 mm
2
)
Earthed power outlet or shaped solid rubber plug 16 A/250 V∼ , IP68
Operating temperature - 40°C to + 59°C
Dimensions (H x W x D) 291 x 650 x 650 mm
Weight approx. 18,000 g
Φ CRI CCT
80,000 lm 70 5000K
Note
The clearance on all sides must be at least 500 mm.