Würth 0715 93 90, Руководство по эксплуатации, Страница: 9 / 84

9
GB
Product specifications
Typ A90 AR90 R90
Art. no. 0715 93 91 0715 93 970 0715 93 90
Operating pressure 6,5-7 bar 6,5-7 bar -
Emptying pressure 0.5-1 bar 0.5-1 bar 0.5-1 bar
Nominal tank capacity 90L 90L 90L
Maximum amount of waste oil 75L 75L 75L
Prechamber capacity 8L 8L -
Oil temperature during extraction 70 - 80°C 70 - 80°C -
Weight 36 kg 42.1 kg 34 kg
Maximum height 1,400 mm 1,880 mm 1,900 mm
Ambient temperature in use -10°C to max. +90°C
It is only possible to work safe-
ly with this product if you read
these operating instructions and
the safety instructions in their
entirety, fully understand the in-
structions and strictly follow the
information given.
q Check the following parts for wear and function
prior to use: pipes, cocks, wheels, tank and ven-
turi unit (A90 and AR90 only).
q Pull the small ring on the safety valve (next to
compressed air cock Q) to check the freedom
of movement (correct function) of the valve.
q Store the product in a place where it is protect-
ed from the weather.
q Never use on an uneven floor.
q Do not place any objects on the tank, as the
tank may then tip over due to imbalance!
q Do not place the tank upside down to drain the
waste oil!
q Never subject the tank to a source of heat.
q Do not perform any welding on the tank.
q Protect hands and face if you extract oils par-
ticularly at high temperatures.
q Never collect hydraulic fluid, corrosive or easily
inflammable liquids in the product.
q Only use original Würth accessories.
For your safety
Correct use
These products are only suitable for use in garages.
The products are designed for collecting waste oil; the
oil can be extracted or collected. Any other usage is
improper and therefore not allowed (e.g. extracting /
collecting caustic or inflammable liquids, etc.).The tank
is not suitable for storing waste oil. The oil must there-
fore be regularly transferred to a suitable collecting
container.
Assembling products
Fig. 1
- Fit the handle (A) in the related holders and
then fix using the screws (B).
Fasten the pipe clip (C) and the tool tray (D).
Fig. 2
- Connect the drain hose (E) to the hose union on
the cock and fasten using the hose clip supplied (F).
Close the cock (G).
Fig. 3 (A90 / AR90)
Fit the prechamber to the tank and ensure the seal is
fitted to the coupling. Fit the threaded ring and tighten
using a C-spanner.