ANI-1F1-A
12
ANI-1F1-A_V2.5.1_PI_2022-01_EN
Subject to technical changes
FRIGOLINK
A
N
I-1
F1
-A
_V
2.
5.
1_
P
I_
20
22
-0
1_
E
N
.fm
Dismantling
1. Insert a flat-tip screwdriver in the openings in the fastening safety catches.
2. Pull the two fastening safety catches away from the housing until they are heard to click.
3. Swivel the bottom of the module gently away from the top-hat rail and towards yourself.
4. Lift the module upwards away from the top-hat rail.
1.6 Technical data
For details of input assignments, see: chapter 1.4.1 "Input circuit diagram" on page 5.
For details of output assignments, see: chapter 1.4.2 "Output circuit diagram" on page 8.
For details of sensor assignments, see: chapter "Analogue inputs S 1 - S 16" on page 7.
NOTICE
• For information about the ANI-1F1-A functions, please see the product manual for the ANI-1F1.
Power supply
230V~, +10% / -15%, 50Hz, max. 13VA
Display
Optional control panel with graphic display
1 x LED (green/red), operating voltage: green, fault: red
4 x LED (green), CAN bus data traffic (CAN Tx, CAN Rx)
Sensors
16 x DGF/TRK
C-BUS communication
3-conductor CAN bus interface, shielded, galvanically isolated,
screw terminals 2.5mm
2
and RJ45 socket
F-BUS communication
3-conductor CAN bus interface, shielded, galvanically isolated,
screw terminals 2.5mm
2
and RJ45 socket
Modbus communication
3-conductor Modbus interface RS 485, shielded, galvanically iso
-
lated, master, complete termination, screw terminals 2.5mm
2
Analogue inputs
5 x 4-20mA, 23V= power supply
2 x 0-10V=
Digital inputs
20 x floating for 230V~ (neutral conductor N per input)
Analogue outputs
5 x 0-10V=, non-floating, max. load 10mA
Digital outputs
2 x mechanical relays 4(2)A / 230V~ (change-over contact)
12 x mechanical relays 3(1)A / 230V~ (normally open contact)
4 x semiconductor relay 4...60VA / 230V~
Dimensions
(WxHxD) 270 x 80 x 165mm
Housing
Plastic
Fastening
Top-hat rail TH 35-15 or TH 35-7.5 (DIN EN 60715)
Ambient temperature
Operation: -20...+55°C, storage: -25...+70°C
Weight
Approx. 1125g
CE conformity
- 2014/30/EU (EMC Directive)
- 2014/35/EU (Low Voltage Directive)
RoHS II
Valid from
Version 2.5.1
