FKV003
Product information
FKV003_V3.60_PI_2018-01_EN
Subject to technical changes
Page 3 of 4
Circuit diagram
Installing
WARNING! Danger to life from electric shock and/or fire!
Switch off the power to the entire plant before installing! Otherwise a mains voltage and/or
external voltage may still be present even if the control voltage is switched off!
53
106
90
58
This device is designed for top-hat rail
installation. The housing is of a standard size
and is also suitable for installation in fuse boxes,
distribution switch boxes or electric boxes of
refrigeration units.
The devices can be positioned immediately next
to one another and without gaps.
Place the device with the upper guide edge on
the top-hat rail.
Then press the device gently downward until it
engages with the fastening safety catch on the
top-hat rail.
Control of glass and handrail heaters via ECA970
For contactless switching of glass and handrail heaters, connect an ECA970 to the free display output
of the FKV003. To do this, use the pre-assembled ZCB-C/ECA-3.0 connecting cable.
Notes!
You must also observe the detailed description of the ECA970.
The control of a glass and handrail heater via the free display output of the FKV003 is
only possible with HKS-G3 V7.62 or later.