FKE003
Product information
Page 4 of 8
Subject to technical changes
FKE003_V2.2_PI_2018-01_EN
WARNING!
Danger to life from electric shock and/or fire!
Switch power off to the entire system when installing and wiring! Otherwise a mains
voltage and/or external voltage may still be present even if the control voltage is switched
off!
All connections are designed as plugs for prefabricated cable.
Connections for prefabricated cables
The following cables, CAN bus adapters and terminating resistors are available for the FKE003.
Cables
Application
ZCB-C/TR-0.6
Controller – transformer, 0.6m
ZCB-C/TR-2.0
Controller – transformer, 2.0m
ZCB-C/REL2M-5P
Controller – load, 5-pin
ZCB-C/DI-2.0
Controller - digital inputs, 2.0m
ZCB-C/DI-7.0
Controller - digital inputs, 7.0m
ZCB-C/AI-2.0
Controller (plug) – analogue input (wire end sleeves), 4…20mA, 2.0m
ZCB-C/AI-7.0
Controller (plug) – analogue output (wire end sleeves), 4…20mA, 7.0m
ZCB-C/AO-2.0
Controller (plug) – analogue output (wire end sleeves), 0…10V, 2.0m
ZCB-C/BUS-0.6
Controller – controller/bus adapter (plug), 0.6m
ZCB-C/BUS-4.5
Controller – controller/bus adapter (plug), 4.5m
Bus adapter
Application
ZCB-ADP/BUS
CAN bus adapter
Terminating
resistor
Application
ZCB-ADP/R
Terminating resistor for CAN bus