Wurlitzer PRINCESS, Руководство по эксплуатации и обслуживанию, Страница: 34 / 82

BackGround Music (BGM), level 3
PRINCESS – Edition: 17.02.2005
32
OPERATING INSTRUCTIONS
9.4.1 Number of BGM CDs and repeat time, level 3 button 7
Press selection button 7 the diplay shows e.g.:
A = number of BGM CDs; disabled for playstimulator! (The posi-
tion of the first BGM CD will be programmed in the next step;
ref to sec.
9.4.2 )
B = repeat time between BGM tracks (10 min.)
BGM-continuous play = 99
BGM OFF = 00
To program press selection button 7 -hold down- and press selection button R. Release both but-
tons. The display goes dark. Enter the number of CDs and the repeat time by means of the selection
buttons.
9.4.2 Start position for BGM CDs and configuration, level 3 button 8
Press button 8. The start position of the BGM CDs is displayed in the left two digits. The RH digit in-
dicates the actual BGM mode.
A = start position of BGM CDs
B = not used, always 0
C = BGM mode
You can determine the digit for the BGM mode as follows:
Select the desired features and add the corresponding code numbers. Enter the sum of the code
numbers as the mode digit.
Example:
To program press selection button 8 - hold - and press selection button R. The digital display goes
dark. Enter start position (2 digits) followed by a ‘0’ and the BGM mode (1 digit)!
After entering this data the SCC unit calculates the BGM end position itself. For loading of BGM
discs the end position can be calculated as follows:
end position = start position + number of BGM-CDs - 1.
NOTE: If a wall box is connected the BGM selection option must be set to 0.
BGM mode selection
You want to select BGM CDs by coin insertion too:
yes -> 0; no -> 1
You want that the jukebox plays BGM-CDs also
if credit still exists: yes -> 2; no -> 0
BGM start position over 100: yes -> 4; no -> 0
BGM-CDs not selectable by coin insertion = 1
BGM-CDs should not be played at still existing
credits = 0
BGM start position over 100 = 4
Mode number = 5
B
A
B
A
C