Wurlitzer 700, Руководство по обслуживанию

Страница: 20 / 33

Fig. 700-H (Burning Hammers)
BLCCKING HAHME�S
Blocking hammers can be caused by any one of four things, or a
combination of them:
a. Improper capstan screw adjustment.
b. Improper regulating
screw adjustment.
c. Excessive key depth.
d. Excessive after touch.
TONES NO"r PRODUCED BY A LIGHI' TOUCH
This condition is cau8ed by
hammers
letting off too quickly or
too far from the reeds.
ADJUSTING AND CHECKING REEDS
See Page 12 of the Model 112 Service Manual. The procedure is
the same except that the Model 700 does not have a shield over the
reeds. The interiors of the case and top are covered with an electro­
static shield paint, which acts as a shield.
ORDERING REPIACEMENT REEDS
The reeds on the Model 700 have been made stronqer and should give
very good
service
under any nonnal playing conditions.
However,
if it
is necessary
to order replacement
reeds, please
comply with the following
instructions to insure receiving the proper
reeds:
If reeds are desired for the 26th
(A#)
and the 46th (F#)
notes on the Electronic Piano, order one reed No. 586-26�
and one reed No. 586-46-F#. (See Reed Chart, Page 700-29.)
Using the Reed Chart on Page 700-29 of this Service Manual,
list the part number and name of the note to designate the
reed, which will aid our Service Department in filling your
order promptly and correctly.
700-19
scanned by tropical fish tropicalfishvintage.com