Wuhan Guide MISCOM7212G Series, Руководство пользователя, Страница: 12 / 18

MISCOM7212G Series Industrial Ethernet Switch
- 8 -
2.2.2. Installation
This series equipment back panel have fixed well DIN rail-way connection
seat. If need installation, please check DIN rail way condition .
2.2.3. Cable connection
After install Ethernet switch , please correct install cable. The switch
10/100/1000Base-TX RJ45 interface ports, use the crossover cable direct
connect with terminal equipment , use cross wire connect network equipment .
2.2.4. Fiber connection
This switch use 1000Base-LX single mode or multi-mode fiber connector.

When use fiber cable port, remove port cover; When it finish work,
please put the plastic cover to protect the fiber optic head, keep clean.

Check the fiber optic cable head whether it clean or not. If it not clean,
will effect port and communication quality.

One fiber optic head connect with Ethernet switch optic port, the other
fiber head connect with another equipment fiber optic interface equipment.

After connection, please check switch the front interface’s LNK/ACT LED
lights. If lights on, connection is available.
Hot-swappable SFP modules as follows:

Hot-plug procedure: