Procedures
This chapter describes procedures of us
hermal Camera. For more detailed
s necessary operation when using
2
、
ble and etc. Four groups of
3
、
re finished, power on the camera. Self-checking and cooling process will
4
、
d image displays. Adjust its focus until getting clear
5
、
pply; dis-connect all the cable
ing the
IR136
T
instructions, please refer to followed contents after this chapter.
1
、
Fix
IR136
camera body firmly according to field conditions. It i
IR136
camera for the first time or changing its working place.
Connect power, RS422 / RS232 control cable, video output ca
cables offered along with the camera. The interface is multi-core. Different cores in every
connector to avoid mis-inserting. Aim the attachment plug at the mousing-slug of
corresponding plug base, lightly screw it up clock-wisely; if it seems impossible to plug in,
please check if the cable matches the plug base. Please don't plug in forcedly or damage the
interface. The other end of cables should connect with power, monitor, control keyboard or
PC control interface.
After all connections a
be carried out within following 5~8 minutes. Please be patient to wait in this period. There is only
stand-by image on the screen by then. After cooled process of detector, infrared video output
image will be displayed automatically.
Switch the camera to NFOV after infrare
image of distant target. Then switch over FOV to wide one. The image shall be kept clear
also. If finding bad pixel or shadow displays, you need to do field calibration. The procedures
will be introduced in followed chapter “Quick trouble shooting”.
Close the lens cover after using the camera and cut off power su
connections with
IR136
Thermal Camera if possible.
14
