Statement
：
This guide is applicable to the IR510 Nano series products, including
the following four models. The differences are as follows
,
please
carefully read this guide before using the thermal imager.
Our company shall not bear any legal responsibility for any
mistake and accident caused by own reasons or reasons of
any third party in the course of using this product by the user
or property loss and personal injury caused by misjudgment
against images.
We prepare this guide with the purpose of facilitating users to
use and understand our products. We will try our best to
ensure the accuracy of contents of this guide, but we still
cannot ensure the completeness of contents of it. Since we
have been continuously updating and upgrading our products,
we reserve the right to modify this guide at any time without
prior notice.
Thermal imagers shall not be pointed to high-
strength energy sources (including the Sun, laser
transmitting equipments and their reflection
sources), which otherwise will have a negative
influence on its accuracy and damage or
permanently damage infrared detector of it.
When the thermal imager will be not used for a
long time, charge the thermal imager at least 2.5
hours every two months during the storage, and
store the thermal imager in a dry and well-
ventilated environment.
Human eyes shall not be irradiated by the laser
designator of the thermal imager.
Do not charge the battery in an environment over
40
℃
.
A video output port is provided next to the USB interface at
the bottom of the thermal imager, and will output the image
of the thermal imager to an external monitor for display
through the supplied the video cable.
Simultaneously press "
Image Mode Zoom
Button
" to turn on the video output; in the video output
status, there is a video output icon.
WUHAN GUIDE SENSMART TECH CO.,LTD.
http://www.guideir.com
Model
Lens
19mm
25
mm
(supports
expansion lens)
Function
IR510
N1
IR510
N1 WIFI
IR510
N2
IR510
N2 WIFI
√
√
√
√
√
√
×
×
×
×
×
×
Wifi(APP)
Freeze
Image
enhance
√
√
×
×
×
√
×
√
Simultaneously press the “
Image Mode Brightness
Button
” to switch on/off the cursor.
Cursor switch
SERIES
SERIES
