PH802 Advanced Configuration Manual
automatically modify the adjustment and save the configuration according to IP and subnet mask
team DHCP Lease Table, user need to restart the IP Phone to make DHCP server configuration go
into effect LAN port DHCP server
Enable NAT.
Note:
After switch between Bridge mode and route mode, you need to save and reboot the phone
to make it work. In Bridge Mode, the device's IP address connect to the LAN port will be under
the same net segment with the phone's WAN port IP address, the phone act as a bridge.
3.3 voip
3.3.1 Sip config
Configuration Explanation:
Display the SIP registered state of phone; if register successfully, will be
display Registered in the square brackets, otherwise display Unregistered.
Configure SIP register server IP address, can be domain
name.
Configure SIP register server signal port.
Configure SIP register account
（
usually it is the same
with the port number that configured, some special SIP servers will have different port
Wuchuan Network Tech Co., Ltd
www.5111soft.com
7
