PH802 Advanced Configuration Manual
http://xxx.xxx.xxx.xxx
：
xxxx/
, for example,
http://192.168.1.18:8080.
Or user cannot
find the phone web page.)
z
Two default users for verification are admin
（
user name and password are both admin
）
and guest (User name and password are both guest).
3.1 current state
Network:
Display the current configuration of WAN, LAN: including getting the WAN IP
method and IP(Static, DHCP, PPPoE), MAC address, WAN IP address, LAN IP
address, LAN DHCP server state (on/off).
VOIP:
show the current default signal protocol in use, and some parameters of each
protocol: including Register SIP server IP, proxy server IP address, whether enables
register, whether has registered on, whether enables outbound proxy, whether
enables STUN server.
Phone number:
Display the current configured number and the number type.
The version code and issued date is shown on the end of the page.
3.2 Network
WAN -----
See the current network IP connection mode through this page.
Three mode of getting IP: static, DHCP, PPPOE
Static:
If the system uses the static connection mode, then can set the network IP, Phone,
DNS manually.
DHCP:
The system can use DHCP service in the network, then choose the DHCP service
Wuchuan Network Tech Co., Ltd
www.5111soft.com
4
