wtw TetraCon 700 SW, Руководство по эксплуатации

Страница: 7 / 19

TetraCon
®
700 SW Safety
25 ba75538e01 04/2005
2 Safety
2.1 General information on safety
These safety instructions contain all instructions that have to be
followed for a safe operation of the TetraCon
®
700 SW conductivity
measuring cell. Before starting any work with the TetraCon
®
700 SW,
carefully read the safety instructions and strictly follow all protective
measures mentioned.
Always store and make available these safety instructions together with
the operating manual in the vicinity of the place of installation as
possible.
General safety
instructions
Safety instructions in this operating manual can be recognized by the
warning symbol (triangle) in the left column. The signal word (e. g.
"Caution") indicates the level of the danger:
Warning
indicates instructions that must be followed precisely in order to
prevent serious dangers to persons.
Caution
indicates instructions that must be followed precisely in order to
avoid slight injuries or damage to the instrument or the
environment.
Other labels
Note
indicates notes that draw your attention to special features.
Note
indicates cross-references to other documents, e.g. operating
manuals.
2.2 Authorized use
The authorized use of the TetraCon
®
700 SW is stationary conductivity
measurement.
The technical specifications according to chapter 8 T
ECHNICAL DATA
must be observed. Only operation according to the instructions given in
this operating manual is considered to be authorized.
Any other use is considered to be unauthorized. Unauthorized use
invalidates any claims with regard to the guarantee.