wtw PROTOC 200, Руководство по эксплуатации

Страница: 14 / 60

Installation PROTOC 200
3 - 14
3.3 Prerequisites for installation
Location
l
The equipment is not designed for outdoor use.
l
The equipment should be installed as close as possible to the loca-
tion where the sample is taken to avoid any changes to the sample
en route to the analyzer and to minimize the inlet lag time.
l
The analyzer should be protected against strong vibrations (as may
be caused by large motors, pumps, etc.) since these may negatively
affect performance.
l
There must be an open and pressure-free drain.