wtw Oxi 7310, Руководство по эксплуатации

Страница: 40 / 60

Data storage Oxi 7310
40
ba75931e03 12/2011
Quitting the display
To quit the display of stored measurement datasets, you have the following
options:
 Switch directly to the measured value display with
<M>
.
 Quit the display and move to the next higher menu level with
<F1>
/
[Back]
.
7.3.2 Erasing the measurement data storage
Erasing the measurement data storage (see section 7.3.1 D
ISPLAYING AND
EDITING THE MEASUREMENT DATA STORAGE
, page 38).
7.3.3 Measurement dataset
A complete dataset includes:
 ID number
 Date/time
 Measured value of the connected sensor
 Measured temperature value of the connected sensor
 AutoRead info: The
AR
indicator appears with the measured value if the
AutoRead criterion was met while storing (stable measured value). Other-
wise, there is no
AR
indicator.
 Calibration evaluation: +++, ++, +, -, or no evaluation
7.3.4 Storage locations
The Oxi 7310 meter has two measurement data storages. The measured
values recorded either manually or automatic are stored separately in indi-
vidual measurement data storages.
Storage Maximum number of datasets
Manual data storage
500
Automatic data storage
5000