wtw Oxi 7310, Руководство по эксплуатации

Страница: 16 / 60

Operation Oxi 7310
16
ba75931e03 12/2011
4.3 Switching off
Automatic switch-off
function
The instrument has an automatic switch-off function in order to save the
batteries (see section 6.2.1 S
YSTEM
, page 32). The automatic switch-off func-
tion switches off the meter if no key is pressed for an adjustable period.
The automatic switch-off function is not active
 if the communication cable is connected
 if the
Automatic data storage
function is active, or with
automatic data trans-
mission
 if the power pack is connected
Display illumination
The meter automatically switches off the display illumination if no key is
pressed for 30 seconds. The illumination is switched on with the next keystroke
again.
You can also generally switch the display illumination on or off (see section
6.2.1 S
YSTEM
, page 32).
4.4 Navigation
The principles of navigation in menus and dialogs are explained in the following
sections.
4.4.1 Operating modes
The meter has the following operating modes:
Only those displays and functions are available in the active operating mode
that are currently being required.
1. Switch the meter off with
<On/Off>
.
Operating
mode Description
Measuring
The measurement data of the connected sensor are shown
in the measured value display
Calibration
The course of a calibration with calibration information, func-
tions and settings is displayed
Storing in
memory
The meter stores measuring data automatically or manually
Transmit-
ting data
The meter transmits measuring data and calibration records
to a USB-B interface automatically or manually.
Setting
The system menu or a sensor menu with submenus, set-
tings and functions is displayed