wtw Oxi 3310, Руководство по эксплуатации

Страница: 43 / 62

Oxi 3310 Operation
43 ba75804e06 03/2012
4.6.2 Connecting a PC
Connect the Oxi 3310 to the PC via the USB interface.
Warning
The USB interface is not galvanically isolated.
When a grounded PC is connected, measurements cannot be
performed in grounded media as incorrect values would result.
Installation of the USB
driver on the PC
System requirements of the PC for installation of the USB driver:

PC with Pentium processor or higher with at least one free USB
connection and CD-ROM drive

Windows 2000, XP, Vista.
4.6.3 Operation with MultiLab pilot
With the aid of the MultiLab pilot software, you can record and evaluate
measuring data with a PC. The data transmission takes place after the
meter is connected to the USB interface of the PC.
Note
More detailed information can be found in the MultiLab pilot operating
manual.
Note
To display the measurement data of the Oxi 3310 correctly on the PC,
the Oxi 3310 has to be set up for communication with the MultiLab pilot.
To do so, set the Send ID option to No in the menu for automatic
storage (<F2
_
>/[USB output]).
1 Insert the supplied installation CD in the CD drive of your PC.
2 Install the driver from the CD.
Follow the Windows installation instructions as necessary.
3 Connect the Oxi 3310 to the PC via the USB interface.
The meter is listed as a virtual COM interface among the
connections in the Windows instrument manager.