wtw MIQ/T2020 PLUS, Руководство по эксплуатации

Страница: 29 / 38

IQ S
ENSOR
N
ET
MIQ/T2020 PLUS Operation
4 - 15
Manual retransfer The system configuration stored in the MIQ/T2020 PLUS can be
manually retransferred to the main controller at any time. To do so,
proceed as follows:
4.4 Software status
The system gives information on the current versions of the software.
figure 4-9 100 - Settings -> Service
1 Open the Settings menu with
s
.
2 Select the Service menu item with
d
and press
g
.
3 Using
d
, select the menu item, Retransfer configuration, and
press
g
. The process is started.
4 Wait until the retransfer is completed.
5 Confirm the closing message with
g
.
1 Call up the measured value display with
m
.
2 Open the Settings menu with
s
.
3 Highlight the Service menu item with
d
and confirm with
g
.
The Software versions dialog window opens.
4 Leave the Software versions dialog window with
m
or
g
.