wtw MIQ/T2020 PLUS, Руководство по эксплуатации

Страница: 11 / 38

IQ S
ENSOR
N
ET
MIQ/T2020 PLUS Installation
3 - 1
3 Installation
3.1 Scope of delivery
l
MIQ/T2020 PLUS terminal
l
Operating Manual
3.2 Commissioning
Note
Follow the installation instructions in the I
NSTALLATION
chapter of the
system operating manual.
Up to three terminal components can be docked on an IQ S
ENSOR
N
ET
system.
3.2.1 Software requirements
The MIQ/T2020 PLUS requires for its operation an IQ S
ENSOR
N
ET
main controller with the software version 2.04 or higher. Full
functionality is available when using a main controller with the software
version 2.70 or higher. Using older main controller versions there are
small functional restrictions when retransferring the stored settings (for
details, see section 4.3.3).
3.2.2 Docking and removing a terminal
The mobile MIQ/T2020 PLUS terminal is docked on the lid of any free
MIQ module. The terminal can be docked while the system is running
without the measurement being interrupted.
Docking the terminal
Fig. 3-1 Preparing the MIQ module for docking
1