wtw MIQ/24V, Руководство по эксплуатации, Страница: 16 / 18

Technical data MIQ/24V
5 - 2
ba64114e02 08/2006
Caution
If the original fuse needs to be replaced, it may only be replaced
by a fuse of the same type and manufacturer.
Instrument safety
Terminal connections
Caution
Only the line cross-sections specified under E
LECTRICAL DATA
,
Seite 1 can be used for the 24 V AC/DC connection.
Number of MIQ/24V in
an IQ S
ENSOR
N
ET
sys-
tem
Maximum of 3, depending on the overall
power requirement of the system (see sys-
tem operating manual, section P
RINCIPLES
OF AN OPTIMUM INSTALLATION
)
Instrument internal
fuses 5 x 20 T 1.6 A, with UL approval
Manufacturer:
Littlefuse
Type: Series 218
Applicable norms – EN 61010-1
– UL 3111-1
– CAN/CSA C22.2 No. 1010.1
IQ S
ENSOR
N
ET
connec-
tions
3
Additional connectable SENSORNET termi-
nator (terminating resistor)
Terminal type Screw-type terminal strip, accessible by
raising the lid
Terminal ranges Solid wires: 0.2 ... 4.0 mm
2
AWG 24 ... 12
Flexible wires: 0.2 ... 2.5 mm
2
Cable feeds 4 cable glands M16 x 1.5 on the underside
of the module