Cleaning Air Box
Installation
3 - 1
ba75731e02
02/2008
3
Installation
3.1
Scope of delivery
The following parts are included in the scope of delivery of the Cleaning
Air Box:
z
Cleaning Air Box
z
Accessory set, including
– Intake air filter
– 4 x screws M5x16
– Fitting for compressed air hose
– Hose clip
z
Operating manual.
3.2
Requirements of the measurement location
Warning
The Cleaning Air Box is not suitable for operation in a potentially
explosive environment.
Ambient conditions
If the Cleaning Air Box is installed outside it should be protected by a
sun shield against the effects of the weather (snow, ice and direct solar
radiation). The measurement location must meet the environmental
conditions specified in chapter 8 T
ECHNICAL
DATA
.
3.3
Mounting
Sun shield mounting
Suitable sun shields are the SSH/IQ (single) and SD/M 170-D (double).
Note
Ordering information on the sun shields is given in
chapter 6 R
EPLACEMENT
PARTS
AND
ACCESSORIES
.
Mount the Cleaning Air Box on the sun shield as follows.
1
Open the lid of the Cleaning Air Box.
2
Mount the Cleaning Air Box on the sun shield by tightening the
supplied M5 screws at the corners.
