2-5
Unit Description
2.5. VMR-HD4D-8 Series - Front Panel
As shown in Figure 2.5, the VMR-HD4D-8 Series Front Panel includes the following
components:
1.
Network Port:
An RJ45 Gigabit Ethernet port for connection to your
10/100/1000Base-T, TCP/IP network. Note that the VMR features a default IP
address (192.168.168.168). This allows you to connect to the unit without first
assigning an IP address. Note that the Network Port also includes two, small
LED indicators for Link and Data Activity. For more information on Network Port
configuration, please refer to Section 6.8.
2.
SetUp Port:
An RJ45 RS232 serial port (DCE configuration) used for connection to
a local terminal or external modem, as described in Section 4.3. For a description
of the Setup Port interface, please refer to Appendix B.1.
3.
"ON" Indicator:
An LED which lights when power is applied to the VMR.
4.
"RDY" Indicator:
(Ready) Flashes if unit is ready to receive commands.
5.
Default Button:
Toggles outlets On/Off or resets unit to factory default parameters
as described in Section 2.11.
6.
Reset Button:
Reboots and/or resets the VMR to factory defaults as described in
Section 2.11.
Note:
All Front Panel Button functions can also be disabled via the System
Parameters menu, as described in Section 6.2.
7.
Output Status Indicators:
LEDs light when corresponding outlet is switched On.
8.
Current Usage Indicators:
Ten LEDs which light to indicate total current usage by
each Power Circuit. The first LED lights when 0% to 9% of maximum rated current
is used, and the last LED lights when over 100% of maximum rated current is used.
9.
Circuit Breakers:
Eight circuit breakers. Each circuit breaker protects one of the
switched outlets on the VMR-HD4D-8 Back Panel.
SYSTEM STATUS
ON
RDY
DEF
RST
0%
0%
100%
100%
B4
ON
OFF
A4
ON
OFF
B3
ON
OFF
A3
ON
OFF
B2
ON
OFF
B1
ON
OFF
A1
ON
OFF
A2
ON
OFF
VMR-HD
www.wti.com
PLUG STATUS
CURRENT USAGE
CURRENT USAGE
1
9
2 3 4 5 6 7
8
9
Figure 2.5: VMR-HD4D-8 Series - Front Panel
