WTI IPS-1600, Руководство пользователя

Страница: 43 / 60

6-5
Operation
To Switch Plugs, or initiate a Boot Cycle, proceed as follows:
1.
Switch Plug(s) On:
To power-on a plug, type
/ON n
and press [Enter].
Where "
n
" is the number or name of the desired plug.
For example:
/ON 1
or
/ON ROUTER
2.
Switch Plug(s) Off:
To power-off a plug, type
/OFF n
and press
[Enter] . Where "
n
" is the number or name of the desired plug. Note that
the "
/OFF
" command can also be entered as "
/OF
". For example:
/OFF 2
or
/OF ROUTER
3.
Boot Plug(s):
To initiate a Boot cycle, type
/BOOT n
and press
[Enter]
.
Where "
n
" is a the number or name of the desired plug. Note that the
"
/BOOT
" command can also be entered as "
/BO
". For example:
/BOOT 1
or
/BO ATMSWTCH
4.
Set Plugs to Power Up Defaults:
Type
/D
and press
[Enter]
. Plugs
will be set to their default On/Off status, which is defined using the Plug
Parameters Menu as described in Section 5.3.3.
Notes:
• When you have accessed command mode using the System
Password, the Default command will be applied to all plugs.
• When you have accessed command mode using a Plug (User)
Password, the Default command will only be applied to the plugs
permitted by the password.
5. Suppress Command Confirmation Prompt: To execute a Boot/On/Off
command without displaying the "Sure?" prompt, include the "
,Y
" option
at the end of the command line. For example:
/ON ROUTER,Y
or
/BOOT 2,Y