WTC DEP 300s, Руководство пользователя

Страница: 68 / 137

M035030-V2.0-Q06905/07-2017
65 of 104
The stepper settings determine when current is added and the
amount of current to add. When you select REVIEW STEPPER,
you’ll see a menu to program the stepper settings.

B
Press Review Stepper
Example of a stepper profile as accessed from the Review Stepper
key from the previous screen. By default, Stepper #1 is displayed.
This display shows the amount
of energy to add to the weld
function during each step of the
stepper profile (either % heat or
secondary current, based on the
firing mode used by the weld
function executed).
Weld energy is added by the
stepper over the 5 steps in
the profile, in increments of 3%.
The amount of weld energy
added or subtracted is
determined by the weld count
and the values programmed in
the stepper profile.
For example, the sample display shows that in step #1, the control
will 3% heat to the base heat (programmed in the weld function)
over the course of 60 welds.
If the weld function used the constant current firing mode (rather
than automatic voltage compensation), the device would instead
add 100 amps of secondary current to the base amps (programmed
in the weld function) over the course of 60 welds.