WTC DEP 300s, Руководство пользователя

Страница: 34 / 137

M035030-V2.0-Q06905/07-2017
31 of 40 Connect to the weld control via the serial network
E
When CONFIRM [F1] is pressed, the communication between the
DEP and the weld timer is closed, the DEP changes its Local IP Address
back to the previous setting and the DEP returns to the Home Menu.
GLOBAL ETHERNET (F3)
In the Global EtherNet mode, the DEP-300s is capable of
communicating with multiple weld timers on an EtherNet IP network.
NOTE:
In order to communicate in Global EtherNet mode, the IP Address
and Subnet Mask of the weld timers must be set correctly. This is
determined by the plant network administrator.
NOTE:
For instructions on how to physically connect the DEP-300s to a weld
timer for Global EtherNet IP communications, see “Physical
Connections” on page 11
NOTE:
There are two methods for the DEP-300s to establish communications
with a weld timer.
NOTE:
IP Address set on the Global network will change back to the default
89.89.200.250 when the Local EtherNet key is pressed to
communicate with the timer.