Original Operating Instructions
BATD0050-ES-1-400-1
Installation
O_BATD0050-ES-1-400-1_V2.6_GB
Page
33
of
72
3.5.1.3 DC Connection
Prerequisites:
If the battery has no circuit breaker or fuse, a circuit breaker or fuse
must
be
installed between the battery and the product. This must be able to securely
switch off the short-circuit current of the battery under fault conditions.
Required material:
•
2 x
8.4 millimeter conical spring washer
•
2 x M8 millimeter hexagon socket-head screw
Figure 13: DC connection
Pos. Description
1
DC circuit breaker
2
Protective cover
3
DC (-)
4
DC (+)
Procedure:
1.
Remove
the protective cover (Figure 13).
2.
Check
the correct polarity.
3.
Connect
the DC (+) and DC (-) cables onto the corresponding terminal.
4.
Tighten
the screws with a torque of
22 Nm
.
NOTICE: The cable lugs must be suitable for M8 screws.
5.
Mount
the protective cover.
Содержание BATD0050-ES-1-400-1
Страница 72: ......
