Installation & Operation Manual
Wall Mounted- Outdoor Drinking Fountain / Bottle Filler
WODF-1WM Series / CWBF-1WM Series
Willoughby Stainless Fountains
TOLL FREE
(800) 428-4065
● LOCAL
(317) 875-0830
● FAX
(317) 875-0837
Page 12
Rev. 3/2018
www.willoughbystainlessfountains.com
Installation Instructions (cont.)
Step 2A: Adjusting Drinking Fountain Flow
(WODF-1 shown)
1.) Insert a standard flat-head screwdriver into
adjustment opening on face of pushbutton,
as shown.
2.) Rotate screwdriver to adjust until
desired flow is achieved:
Rotate clockwise to increase flow.
Rotate counterclockwise to decrease flow.
Step 2B: Battery Operated Infrared Sensor Startup
1.)
Remove the bottle filler body cap on the top of the fixture.
2.)
Open the top of the battery box and insert 4X batteries. Replace the battery box, and
check that all sensor, battery box, and valve connections are secure.
3.)
Replace the body cap once the IR sensor has completed the start-up mode.