turns on. Press “Intercom” to have a conversation with the visitor; Press “Silent” to shut down the rings;
Press “Hand Off” to end the call.
Emergence-handing
When there is alarm happened, the door phone will alarm during setting time. LCD turns on and the status
indicator will be red at the same time. The indicator of the alarm zone will be red, and it will shows the red
fonts to prompt this alarm zone: Resident can check and remove alarm by door phones.
Press “disarm” on
the arm interface, if it is fast mode, then do it by the fast mode; if it is separate control zone, then disarm by
that.
Fire, Gas
If there dangerous, it will alarm under the “armed” state, and send the message to the Guard Centre at the
same time .
PIR, Magnetic Contact
After armed, if don't handle the alarm during the arm delay time; then start checking, if there is arm
happened, if don't disarm in 40s, then it will send the information to the guard center.
Zone5, Zone6
It will check after armed, if there is dangerous, the site will alarm, if don't disarm in 40s, it will send the
message to guard center.
Zone7, Zone8
It will check after armed, if there is dangerous, the site will alarm, it will send the message to guard center.
25
Operation
Operation
