WritFun W300, Руководство пользователя

Страница: 8 / 22

WritFun W300 User Manual www.WritFun.com Page: 7
3、Attention
3.1 Attention
1.Please fully charge before use(at least two hours)
2. Always use an original Writfun charger intended for your specific Writfun model.
3.Standby time up to seven days but depends on different operating condition.
4.Press reset button while system crash or no response then power on again
5.If the device is not in charging, it will be automatically power off after being
idle for 1 hour.
6.To switch to USB storage mode, please follow the steps below
- turn off W300 and connect W300 to your pc via the USB cable.
- turn on W300, and then the W300 is removable disk (USB drive).
- to open the saved data in W300, please use the WritFun_W300_Tool, which can be
downloaded from www.writfun.com ( please download & install Microsoft .net framework
4.0 or later in your pc.
Reference link is available on www.writfun.com)
User manual is ready for download from www.writfun.com for more detail.
3.2 Startup and Pairing
1. W300 supports Bluetooth and WiFi functions, range:5 meters.
2. Please follow below instructions to start pairing your device:
a. For PC (Windows system) users:
i. Power on W300 first and connect to your PC via a USB cable.
ii. Download W300 Graphic Driver from www.wirtfun.com and unzip the file.
iii. Run the W300 Graphic Driver and follow the instruction to install the driver.
(“Hanvon Tablet” means W300)
iv. Restart your PC
b. For Smartphones (Android and iOS):
i. Install WritFun W300 App from App Store or Google Play. Turn on GPS and
Bluetooth, users may synchronize handwriting contents from W300 after
pairing with Smartphones. (Refer to 4.1, 4.2 section.)