background image

 

WRIGHT MANUFACTURING, INC. POWER EQUIPMENT LIMITED WARRANTY 

THIS WARRANTY SUPERSEDES ALL PREVIOUS ON UNITS WITH A RETAIL SALES DATE ON OR AFTER 03/17/03 

Wright Manufacturing, Inc. (hereinafter: WMI) warrants to the original owner that the 
new WMI mower accompanying this document will be free from manufacturing defects 
in materials or workmanship subject to the following limitations and exclusions.  Any 
part of the WMI commercial mower manufactured by WMI and found, in the 
reasonable judgment of WMI, to be defective in materials or workmanship, will be 
repaired or replaced by an Authorized WMI Service Dealer without charge for parts 
and (except as excluded below) labor.  This Warranty is limited to the original Owner 
and the mower this document was provided with and is not transferable.  Demo units 
with less than fifty hours when first retailed shall also be covered by this limited 
warranty.  Proofs of Purchase, Authorized Dealer performed Pre-Deliver Service and 
the First Eight Hour Service will be required by the Authorized WMI Service Dealer to 
substantiate any warranty claims.  All WMI warranty work must be performed by an 
Authorized WMI Service Dealer and item must be delivered to the dealer prior to the 
expiration of the warranty period.  This Warranty is limited to the following specified 
periods from the date of the original retail purchase for defects in materials or 
workmanship: 
 

Component Manufacturers’ Warranties 
Hydraulic pumps

 are covered by the pump manufacturer’s warranty for two (2) years 

and handled through WMI.  Hydraulic pumps are covered for a total of two (2) years for 
parts and labor.  Part must be returned to WMI prior to warranty payment. 

Hydraulic wheel motors

 are covered by the motor manufacturer’s warranty.  WMI   

enhances this warranty according to the following procedure:  Hydraulic motor 
warranties will be handled through WMI for two (2) years for parts and labor.  Part 
must be returned to WMI prior to warranty payment. 

Engine

 is covered by the engine manufacturer’s warranty and handled through the 

respective Authorized Engine Dealers. 

Electric clutch

 is covered by the clutch manufacturer’s warranty for one (1) year and 

handled through WMI for parts and labor.  Electric clutch is covered by WMI for one (1)  
additional year for parts only and handled through WMI for a total of two (2) years.  
Part must be returned to WMI prior to warranty payment. 

 

See the respective manufacturers’ warranties for the engine and hydraulic 
components included with the mower. 

 

Ninety Day Items 
Batteries

 are warranted for ninety (90) days. 

 

Two and Three Year Items 
Cutter decks, engine decks, upright instrument supports, Sentar cockpits and  
Sentar carrier frame weldments

 are warranted for one (1) year against cracks and 

broken welds for the part and labor and an additional two (2) years for the part only, no 
labor or freight for a total of three (3) years.  To make a valid claim, cracks and broken 
welds must be brought to the attention of an Authorized WMI Service Dealer before 
any accumulation of cracks is greater than 5 inches.  WMI must be called on the 
phone by Distributor for approval prior to repair or replacement.  Dealer repair is 
encouraged and the replacement option shall be at WMI’s sole discretion.  During the 
second and third year, at the option of WMI, the weldment should be shipped to WMI, 
freight prepaid by Owner, for factory reconditioning or replacement to be shipped back 
to Owner, freight collect, within two weeks of receipt by WMI. 

Spindle Assemblies

 (for blades) (housing, shaft, bearings) are warranted for one (1) 

year parts and labor and two (2) additional years parts only for a total of three (3) 
years.   

 

All other parts of the original mower are warranted for one (1) year parts and labor and 
an additional one (1) year parts only for a total of two (2) years. 

 

Repair Parts Replaced During Original Warranty 

All Repair parts (excluding wear items) installed during the warranty period are 
warranted until the end of the respective original period according to the categories 
above except in the case that the respective original warranty period expires in less 
than ninety (90) days after the installation of the part(s).  If this happens then the parts 
are warranted for a total of ninety (90) days from the time of their installation. 

 

Rental Use 

The above warranty periods are limited to maximum of ninety (90) days for mowers 
that are used for rental purposes. 

 
 

 
 
 

Exclusions:

 

Air, engine oil and hydraulic oil filters, tires, tubes 
Bent parts occurring through impact or hard use 
Worn bearings (other than spindle bearings; see above) 
Worn bushings, cotters, clips, pins and retainers 
Grease fittings/zerks 
Paint and cosmetic imperfections, steel surface imperfections 
Fabric, cushion and rubber grip wear or damage 
Drive belts, cutter blades, hoses, light bulbs, fuses 
Damage due to loose pulleys on shafts 
Damage due to loose wheel hubs on tapered Hydraulic motor shafts 
Fire Damage 
Abrasion or corrosion wear or damage 
 

The WMI mower, including any defective part, must be returned to an Authorized WMI 
Service Dealer within the warranty period.  The expense of lost production time and 
delivering the mower to the Authorized WMI Service Dealer for warranty work and the 
expense of returning it to the Owner after repair will be paid for by the Owner.  WMI’s 
responsibility is limited to making the required repairs and no claim of breach of warranty 
shall be cause for cancellation or rescission of the contract of sale of any WMI mower.  
This Warranty does not apply to any mower that was delivered to an Owner prior to the 
Pre-Delivery Service as specified in the Owner’s Manual.  This Warranty does not apply 
to any mower that was shipped in a crate to the Owner or delivered to the Owner by non-
employees of an Authorized Dealer.  For the Owner’s protection and a valid Warranty, 
please note:  WMI does not permit Authorized Dealers to make non-face-to-face 
deliveries of the mower and any who are found doing so are subject to immediate 
cancellation as Authorized Dealers.  This Warranty does not cover any mower that has 
been subject to misuse, neglect, negligence, burning in any fire, an accident, or that has 
been operated or maintained in any way contrary to the operating and maintenance 
instructions as specified in the Owner’s Manual.  The Warranty does not apply to any 
damage to the mower that is the result of improper maintenance, or to any mower or parts 
that have not been assembled or installed as specified in the Owner’s Manual.  The 
Warranty does not cover any mower that has been altered or modified changing 
performance or durability.  In addition, the Warranty does not extend to repairs made 
necessary by normal wear, or by the use of parts or accessories which, in the reasonable 
judgment of WMI, are either incompatible with the WMI mower or adversely affect its 
operation, performance or durability. 
 
WMI reserves the right to change or improve the design of any mower without assuming 
any obligation to modify any mower previously manufactured. 
 
All other implied warranties are limited in duration to the two (2) year warranty period or 
ninety (90) days for mowers used for rental purposes.  Accordingly, any such implied 
warranties including merchantability, fitness for a particular purpose, or otherwise, are 
disclaimed in their entirety after the expiration for the appropriate two (2) year or ninety 
(90) day warranty period.  WMI’s obligation under this Warranty is strictly limited to the 
repair or replacement of defective parts and WMI does not assume, or authorize anyone 
to assume for them, any other obligation.  Some states do not allow limitations on how 
long an implied warranty lasts, so the above limitation may not apply. 
 
WMI assumes no responsibility for incidental, consequential or other damages including, 
but not limited to, expense for gasoline, expense of delivering the mower to an Authorized 
WMI Service Dealer and expense of returning it to the Owner, damage by fire, mechanic’s 
travel time, telephone charges, rental of a like product during the time warranty repairs 
are being performed, travel, loss or damage to personal property, loss of revenue, loss of 
use of the power equipment, loss of time or inconvenience.  Some states do not allow the 
exclusion or limitation of incidental or consequential damages, so the above limitation or 
exclusion may not apply. 
 
This Warranty gives you specific legal rights, and you may also have other rights which 
vary from state to state. 
 
This Warranty applies to all WMI mowers sold in the United States of America and  
Canada. 
 
For the location of the Authorized WMI Service Dealer nearest you, write to: 
 

Wright Manufacturing, Inc. 

4600X Wedgewood Blvd. 

Frederick, MD 21703 

www.wrightmfg.com

 

Содержание Sentar 19729


















Отзывы: