background image

WRIGHT MANUFACTURING, INC. POWER EQUIPMENT LIMITED WARRANTY

Wright Manufacturing, Inc. (hereinafter: WMI) warrants to the original owner that the

new WMI mower accompanying this document will be free from manufacturing

defects in materials or workmanship subject to the following limitations and exclusions.

Any part of the WMI commercial mower manufactured by WMI and found, in the

reasonable judgment of WMI, to be defective in materials or workmanship, will be

repaired or replaced by an Authorized WMI Service Dealer without charge for parts

and (except as excluded below) labor. This Warranty is limited to the original Owner

and the mower this document was provided with and is not transferable. Demo units

with less than fifty hours when first retailed shall also be covered by this limited

warranty. Proofs of Purchase, Authorized Dealer performed Pre-Delivery Service

and the First Eight Hour Service will be required by the Authorized WMI Service

Dealer to substantiate any warranty claims. All WMI warranty work must be

performed by an Authorized WMI Service Dealer and item must be delivered to the

dealer prior to the expiration of the warranty period. This Warranty is limited to the

following specified periods from the date of the original retail purchase for defects in

materials or workmanship:
Component Manufacturers' Warranties

Hydraulic pumps are covered by the pump manufacturer’s warranty for one (1) year

and handled through WMI. Hydraulic pumps are covered by WMI for one (1)

additional year and handled through WMI for a total of two (2) years for parts and

labor.  Part must be returned for credit before warranty payment.

Hydraulic motors are covered by the motor manufacturer’s warranty  for the part only

and no labor. However, WMI enhances this warranty according to the following

procedure: Hydraulic motor warranties will be handled  through  WMI for two

(2) years from the retail purchase date for parts and labor. Effective for retail sales

after 3/1/02. Part must be returned for credit before warranty payment.

Engine is covered by the engine manufacturer’s warranty and handled through the

respective Authorized Engine Dealers.

Electric clutch is covered by the clutch manufacturer’s warranty for one (1) year and

handled through WMI for parts and labor. Electric clutch is covered by  WMI

for one additional year for parts only and handled through WMI for a total of two

(2) years. Part must be returned for credit before warranty payment.

See the respective manufacturers’ warranties for the engine and hydraulic compo-

nents included with the mower.

Ninety Day Items

Batteries are warranted for ninety (90) days.

Two and Three Year Items

Cutter deck,  engine deck, upright instrument support, Sentar cockpit and Sentar carrier

frame weldments are warranted for two (2) years against cracks and broken

welds.To make a valid claim, cracks and broken welds must be brought to the

attention of an Authorized WMI Service Dealer before any accumulation of cracks

is greater than 5 inches. WMI must be called on the phone by Distributor for

approval prior to repair or replacement. Dealer repair is encouraged and the

replacement option shall be at WMI's sole discretion.

Cutter Deck Spindle Assemblies (housing, shaft, bearings) are warranted for one (1)

year for parts and labor and one (1) additional year for parts only for a total of two

(2) years. Cutter Deck Spindle Assemblies are warranted for one (1) year for

parts and labor and two (2) additional years for parts only for a total of three (3)

years on Standers with no grease fitting housing (high precision ball bearings)

and Sentars only.

All other parts of the original mower are warranted for two (2) years.

Lifetime Weldments

After the first two (2) years the cutter deck,  engine deck, upright instrument support,

Sentar cockpit and Sentar carrier frame weldments are  warranted for the lifetime

of the original retail purchasing entity against cracks and broken welds for the

part only, no labor or freight.

To make a valid claim under the lifetime major weldment warranty, cracks and broken

welds must be brought to the attention of an Authorized WMI Service Dealer

before any accumulation of cracks is greater than 5 inches. WMI must be called

on the phone for approval prior to repair or replacement.

At the option of WMI the weldment should  be shipped to WMI, freight prepaid by

Owner, for factory reconditioning or replacement to be shipped back to Owner,

freight collect, within two weeks of receipt by WMI.

Repair Parts Replaced During Original Warranty

All repair parts (excluding wear items) installed during the warranty period are

warranted until the end of the respective original period according to the categories

above except in the case that the respective original warranty period expires

in less than ninety (90) days after the installation of the part(s). If this happens

then the parts are warranted for a total of ninety (90) days from the time of their

installation.

Rental Use

The above warranty periods are limited to maximum of ninety (90) days for mowers

that are used for rental purposes.

Exclusions:

Air, engine oil and hydraulic oil filters, tires, tubes

Bent parts occurring through impact or hard use

Worn bearings (other than spindle bearings; see above)

Worn bushings, cotters, clips, pins and retainers

Grease fittings / zerks

Paint and cosmetic imperfections, steel surface imperfections

Fabric, cushion and rubber grip wear or damage

Drive belts, cutter blades, hoses, light bulbs, fuses

Damage due to loose pulleys on shafts

Damage due to loose wheel hubs on tapered Hydraulic motor shafts

Fire damage

Abrasion or corrosion wear or damage

The WMI mower, including any defective part, must be returned to an Authorized WMI

Service Dealer within the warranty period. The expense of lost production time and

delivering the mower to the Authorized WMI Service Dealer for warranty work and

the expense of returning it to the Owner after repair will be paid for by the Owner.

WMI’s responsibility is limited to making the required repairs and no claim of breach

of warranty shall be cause for cancellation or rescission of the contract of sale of any

WMI mower. 

This Warranty does not apply to any mower that was delivered to an

Owner prior to the Pre-Delivery Service as specified in the Owner's Manual. This

Warranty does not apply to any mower that was shipped in a crate to the Owner

or delivered to the Owner by non-employees of an Authorized Dealer. For the Owner's

protection and a valid Warranty, please note: WMI does not permit Authorized

Dealers to make non-face-to-face deliveries of the mower and any who are found

doing so are subject to immediate cancellation as Authorized Dealers.

 This Warranty

does not cover any mower that has been subject to misuse, neglect, negligence,

burning in any fire, an accident, or that has been operated or maintained in any way

contrary to the operating and maintenance instructions as specified in the Owner’s

Manual. The Warranty does not apply to any damage to the mower that is the result

of improper maintenance, or to any mower or parts that have not been assembled

or installed as specified in the Owner’s Manual. The Warranty does not cover any

mower that has been altered or modified changing performance or durability. In

addition, the Warranty does not extend to repairs made necessary by normal wear,

or by the use of parts or accessories which, in the reasonable judgment of WMI, are

either incompatible with the WMI mower or adversely affect its operation, performance

or durability.
WMI reserves the right to change or improve the design of any mower without

assuming any obligation to modify any mower previously manufactured.
All other implied warranties are limited in duration to the two (2) year warranty period

or ninety (90) days for mowers used for rental purposes. Accordingly, any such

implied warranties including merchantability, fitness for a particular purpose, or

otherwise, are disclaimed in their entirety after the expiration of the appropriate two

(2) year or ninety (90) day warranty period. WMI’s obligation under this Warranty

is strictly limited to the repair or replacement of defective parts and WMI does not

assume, or authorize anyone to assume for them, any other obligation. Some states

do not allow limitations on how long an implied warranty lasts, so the above limitation

may not apply.
WMI assumes no responsibility for incidental, consequential or other damages

including, but not limited to, expense for gasoline, expense of delivering the mower

to an Authorized WMI Service Dealer and expense of returning it to the Owner,

damage by fire, mechanic’s travel time, telephone charges, rental of a like product

during the time warranty repairs are being performed, travel, loss or damage to

personal property, loss of revenue, loss of use of the power equipment, loss of time

or inconvenience. Some states do not allow the exclusion or limitation of incidental

or consequential damages, so the above limitation or exclusion may not apply.
This Warranty gives you specific legal rights, and you may also have other rights

which vary from state to state.
This Warranty applies to all WMI mowers sold in the United States of America and

Canada.
For the location of the Authorized WMI Service Dealer nearest you, write to:
Wright Manufacturing, Inc.; 4600X Wedgewood Blvd.; Frederick, MD 21703

\\Server01\company\Marketing\Pagemaker\Product Specific Documents\Stander\Stander Warranty.p65; revised 11/02/01

page 16

Содержание Mower




















Отзывы: