WIM-PD-002_B
Page
14
of
38
4.3.9
Attached new drive ring to the engine flywheel using new hardware.
•
Refer to torque chart in the back of the instructions or torque to engine manufactures
recommended setting.
4.3.10
Attach the new coupling to In-put splined hub using the twelve (12) provided hex head cap
screws (item 4).
•
Apply 242 Loctite or equal to bolts and tighten evenly in 3 stages securing the hub and
coupling.
Grade of bolt
Stage 1
lbf•ft [Nm]
Stage 2
lbf•ft [Nm]
Stage 3
lbf•ft [Nm]
Grade 8.8
22 [30]
44 [60]
55 [75]
Grade 12.9
44 [60]
77 [105]
89 [120]
4.3.11
Install hardware PPD onto engine ensuring coupling aligns with drive ring.
•
Refer to torque chart at the end of the instructions or torque to engine
manufactures recommendation.
4.3.12
Reinstall peripheral items such as belts, guards, etc. per equipment manual.
Содержание WPD-02
