FlashCut CNC
Section 4
The Keys
9
Step/Cont.
– This toggles between the step and continuous modes of running a G-
Code file. (Step mode automatically stops at the end of each G-Code Line)
Reset
– This resets the G-Code Program.
Pt. Prog0
– This places the unit in Point Mode and Chooses the Program Zero Point.
It does not move to that point automatically. To choose a different point from the list,
use the Scroll Up and Scroll Down Keys. You can use the Tab Key to choose a
different coordinate system.
Tab, Scroll Up, Scroll Down
– This is for general purpose cursor movement in and
around the different text boxes and menus.
Enter
– This is for choosing the enter key for messages that come up.
Zero X, Zero Y, Zero Z, Zero All
– These keys will zero out the Program
Coordinates. It is especially useful when jogging your machine to find your program
zero position.
Layer
– This key will toggle between the Green Layer and the Red Layer of the
keyboard.
Aux1 0/1, Aux2 0/1
– This button turns the device connected to the Auxiliary 1 and 2
outputs on and off.
Hold
– This button will stop the movement of the machine in any layer in any
function.
