FlashCut CNC
Section 2
To Prepare Your Device
6
2.
To prepare your device:
1.
Remove Clear Plastic Button Covers
2.
Place Button Labels on white part of button. Make sure that you keep the same order as is on
the label sheet.
3.
Replace Button Covers
4.
Place Protective Cover over pendant. The protective cover can be permanently installed by
removing the paper strips on the edges to expose the adhesive. This protects your pendant
from chips and oil, etc, but does not provide a complete seal to protect against immersion or
heavy spraying.
5.
If needed, install the extension cable on the end of the black cable on the unit.
