WPG QUADRA-TILT MRTA810CDC3O, Руководство по эксплуатации

Страница: 9 / 48

Rev 5.0/2-21 MRTA8-DC3: #35121AUS 7
1)
2A 2B
Remove all shipping materials and save them with the shipping container for future use.
2) Suspend the lifter from appropriate hoisting equipment:
2.1) Select a crane and/or hoist rated for the Maximum Load Capacity plus the
Lifter Weight.
Note: Any lifter use must comply with all statutory or regulatory standards for hoisting
equipment in your region.
2.2) Disengage any tilt locks or latches, and raise the lift bar (figs. 2A-C).
2.3) Attach the hoisting hook to the
lift point (figs. 2D-E).
2D 2E
Make sure
hook has
restraining latch
(circled).
2F
Only use rigging rated for Maximum Load
Capacity plus Lifter Weight.
Use
rigging (fig. 2F) as needed to
make sure the hook does not
interfere with the load.
ASSEMBLY
2C