WPG QUADRA-TILT MRTA810CDC3O, Руководство по эксплуатации

Страница: 23 / 48

Rev 5.0/2-21 MRTA8-DC3: #35121AUS 21
T
O
L
IFT AND
M
OVE THE
L
OAD
About the Tilt Linkage
Unbalanced loads may tilt
unexpectedly during lifter operation.
Make sure load is positioned
correctly on lifter.
The tilt linkage minimizes operator effort and
automatically holds a balanced load in either
the upright or the flat position. However, an
unbalanced load may tilt unexpectedly,
resulting in load damage or personal injury.
To minimize these risks, make certain before lifting any load that it has appropriate “L
OAD
C
HARACTERISTICS
” and is attached to the vacuum lifter as previously directed.
OPERATION