WPG 95723, Инструкция по эксплуатации

Страница: 7 / 10

Rev 3.1/9-22 #35202AFT 5
T
O
S
ET
U
P THE
S
HORT
C
ONFIGURATION
1)
1A
Disconnect the lift point assembly from the upper lift
bar segment:
1.1) Remove the 4¾" hex head bolts and associated
hardware (items A in fig. 1A) that secure the
assembly on the segment.
1.2) Remove the assembly from the segment.
2) Remove the 4" hex head bolts and associated
hardware (items B in fig. 1A) that secure the 2 lift bar
segments. Then disconnect the segments.
Note: Store the upper lift bar segment, 4" hex head
bolts and associated hardware for later use.
3)
3A
Connect the assembly to the lower lift bar segment:
3.1) Align the holes of the assembly with the
corresponding holes at the top of the segment.
Make sure the assembly is oriented as shown in
fig. 3A.
Do not reverse orientation of lift point
assembly when reconfiguring lift bar.
3.2) Use the removed 4¾" hex head bolts and
associated hardware to tightly secure the
assembly on the segment.
ASSEMBLY