MRTALP4-DC3: #35058
Rev 7.5/6-22
12
Repositioning Vacuum Pads
1)
1A
Remove the cotterless hitch pin (fig. 1A) that secures a
sliding/movable pad mount to the pad frame.
2) Position the pad mount as required on the T-arm
assembly.
3) Use the cotterless hitch pin to secure the pad mount.
Repeat these steps to position other pad mounts as needed.
Repositioning T-Arm Cross Members
When more precise pad alignment is needed (eg, on contours of insulated panels), the cross
members of the T-arm assemblies can be repositioned as follows:
1)
1B
Remove the bolts (fig. 1B) connecting a cross member.
2) Move the cross member to the appropriate position.
3) Reinstall the bolts and tighten them securely.
Repeat these steps to reposition the other cross member.
ASSEMBLY
Содержание MRTALP4-DC3
Страница 2: ...MRTALP4 DC3 35058 Rev 7 5 6 22 2 ...
Страница 50: ...MRTALP4 DC3 35058 Rev 7 5 6 22 48 ...
Страница 51: ...Rev 7 5 6 22 MRTALP4 DC3 35058 49 ...
