MRTALP4-DC3: #35058
Rev 7.5/6-22
8
4.3)
4D
4E
4F
Make sure hook has restraining latch
(see arrow in fig. 4E).
Only use rigging rated for Maximum
Load Capacity plus Lifter Weight.
Attach the hoisting hook to the lift
point (fig. 4D-E).
Note: Use rigging (fig. 4F) as
needed to make sure the hook does
not interfere with the load.
4.4) Use the hoisting equipment to remove the lifter from the shipping container. Avoid
damaging the vacuum pads.
5A
5C
5B
5D
6A
5) Connect the electrical connectors (figs. 5A-B and figs. 5C-D) and install the 9-volt battery
for the notification buzzer as directed in
6) Assemble the pad frame for optimal load support (see
). If applicable, remove the pad covers (fig. 6A) and save them for future use.
7) Perform tests as required under
.
ASSEMBLY
Содержание MRTALP4-DC3
Страница 2: ...MRTALP4 DC3 35058 Rev 7 5 6 22 2 ...
Страница 50: ...MRTALP4 DC3 35058 Rev 7 5 6 22 48 ...
Страница 51: ...Rev 7 5 6 22 MRTALP4 DC3 35058 49 ...
