WP Suspension 12.18.0U.67 Скачать руководство пользователя страница 6

2 SAFETY ADVICE

4

2.1

Use definition

intended use

This chassis component is designed and built to withstand the normal stresses and strains of regular racing.

Info

Only use this chassis component in closed-off areas remote from public road traffic.
Only use this chassis component in the vehicle for which the chassis component is approved and/or
recommended.

2.2

Misuse

The chassis component must only be used as intended.
Dangers can arise for people, property and the environment through use not as intended.
Any use of the chassis component beyond the intended and defined use constitutes misuse.
Misuse also includes the use of operating and auxiliary fluids which do not meet the required specification for
the respective use.

2.3

Safety advice

A number of safety instructions need to be followed to operate the product described safely. Therefore read
this instruction and all further instructions included carefully. The safety instructions are highlighted in the text
and are referred to at the relevant passages.

Info

Various information and warning labels are attached in prominent locations on the product described.
Do not remove any information or warning labels. If they are missing, you or others may not recognize
dangers and may therefore be injured.

2.4

Degrees of risk and symbols

Danger

Identifies a danger that will immediately and invariably lead to fatal or serious permanent injury if the
appropriate measures are not taken.

Warning

Identifies a danger that is likely to lead to fatal or serious injury if the appropriate measures are not
taken.

Caution

Identifies a danger that may lead to minor injuries if the appropriate measures are not taken.

Note

Identifies a danger that will lead to considerable machine and material damage if the appropriate measures are
not taken.

Содержание 12.18.0U.67





























Отзывы: